New

[ZeroAccess]

Hey, my name is Glen and I'm from Georgia.

Since I've been 16 (now 22..23..somewhere round there) I've had numerous 10" subs and 1 pair of 12" subs.
Blown a few saved a few ..yadda yadda yah...

Now I'm poor and broke and can't just throw money away like I used too so umm ya....

[cargodz]

Welcome Glen... Hope you stick around... maybe even learn a lil while your here, we got lots of great knowledgable people:)

[Ryan from Ohio]

Welcome to the ghetto ;)

Im poor too, really!

But I save for what I truly want.

[Chris from MI]

Welcome to the ghetto ;)

Im poor too, really!

But I save for what I truly want.

OK, I may just be crazy but the words Poor and McIntosh don't go well together......:rolleyes: J/K You said you save for what you want LOL

Oh yeah and welcome to the board to Glen!!

[ZeroAccess]

I was thinking the same exact thing I didn't even know McIntosh was a brand and then I read a few post and saw he wanted one so I was like aight I'll check ebay...found one for 1,500 and didn't know what it did just knew I wanted it.

[OnYrMrk]

The McIntosh Mx406 retails for $2000, the MX4000 (Ryan's model) sold for about $2500, and the MX5000 (Flagship model) sold for around $3000. Ryan got one heck of a deal on a MX4000 for under a grand. He had under a grand, then spent it, and so now...he is poor.

Welcome to the forum Glen! We have alot of fun here learning more and more about this awesome hobby of ours......basketweaving!

[ZeroAccess]

Yea, I am reading a website about subs and I don't even know what everything means and I figured I'd understand a few things...


DUAL 1 | DUAL 2

Fs: 028.4 Hz | 27.1 Hz
Re: 0.7 Ohms/coil | 1.4 Ohms/coil
Qms: 05.39 | 5.63
Qes: .49 | .48
Qts: .45 | .44
Mms: 211g | 231g
Cms: 0.15mm/N | 0.15mm/N
Sd: 481cm^2 | 481cm^2
Vas: 48.3 l | 48.3 l
Spl: 85.4dB 1W/1m | 84.8dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .8-1.5 cuft
Ported box: 1.8-2.5 cuft @<hidden> 28-33Hz
Sub OD: 12.500”
Cut ID: 11.125”
Mounting depth: 7.000”
Displacement: 0.16cuft

Like what the hell does that stuff mean!?!?
How can you have a coil thats .7ohm's How would you begin to wire that to a 2ohm stable amp ...ya know crap like that

[Scarrell]

to go even further.. theres a few diagrams that show you how to wire your basic dual 2 and 4ohm coils, and single voice coils.. but someone needs to make a diagram for the quad coil and .5ohm coils or whatever and all that junk.

[ZeroAccess]

Like basic ones 4ohm subs going to 8 or 2 ohms and 2 ohm subs going to 4ohm and 1ohm operations I got down pat...

Now I'm overloaded with information...At least I got some resin and what not to fiberglass me a box (forgot about that in the garage)

[cargodz]

Yea, I am reading a website about subs and I don't even know what everything means and I figured I'd understand a few things...


DUAL 1 | DUAL 2

Fs: 028.4 Hz | 27.1 Hz
Re: 0.7 Ohms/coil | 1.4 Ohms/coil
Qms: 05.39 | 5.63
Qes: .49 | .48
Qts: .45 | .44
Mms: 211g | 231g
Cms: 0.15mm/N | 0.15mm/N
Sd: 481cm^2 | 481cm^2
Vas: 48.3 l | 48.3 l
Spl: 85.4dB 1W/1m | 84.8dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .8-1.5 cuft
Ported box: 1.8-2.5 cuft @<hidden> 28-33Hz
Sub OD: 12.500”
Cut ID: 11.125”
Mounting depth: 7.000”
Displacement: 0.16cuft

Like what the hell does that stuff mean!?!?
How can you have a coil thats .7ohm's How would you begin to wire that to a 2ohm stable amp ...ya know crap like that
Don't worry the longer your here the more you'll learn:thumbsup

[GlassWolf]

this is the intro section
not the get help section
please move this discussion to the general or speaker forums.