by GlassWolf » Mon Mar 27, 2006 11:27 pm
you use 8" midbass drivers, not 8" woofers or subs, for midbass purposes, and cross them over from about 500Hz down to 50Hz if they're in the front stage.
If you're putting them in the back, I'd aim more for an octave lower for the LPF, and say 250-50Hz.
use an 18dB slope for the filters, and set your midrange HPF at 12dB slope, an octave above the midbass driver's LPF, so you have an octave gap that's covered by roll off.
you use 8" midbass drivers, not 8" woofers or subs, for midbass purposes, and cross them over from about 500Hz down to 50Hz if they're in the front stage.
If you're putting them in the back, I'd aim more for an octave lower for the LPF, and say 250-50Hz.
use an 18dB slope for the filters, and set your midrange HPF at 12dB slope, an octave above the midbass driver's LPF, so you have an octave gap that's covered by roll off.