Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

having trouble understanding dvc

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:awesome: :argh :ditto :inout :words :bow :cheers: :bigwink: :fing02: :sad017: :scorp: :o :D ;) :p :unwell028 :tongue017 :thumbsup :surprised :sm29: :angry011: :angry015: :angry012: :nono: :angry010: :nono :banghead :mad: :dif :angry :CRZ_13: :eek: :confused: :confused0 :confused :( :sad: :cool: :dance :mecry: :jesterlol :embarrass :flame: :doh :evil019: :evil001: :rolleyes: :sub:
View more smilies
BBCode is ON
[img] is ON
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: having trouble understanding dvc

by Scarrell » Mon Jan 22, 2007 8:49 pm

when you tune a box, it depends on the width and length of the vent or tube you use, you see that L shape in my box? that is what gives my box the 30hz tuning, because of the width of the vent, and how long it is, a couple other people have used my design and had Great results. im powering my Type R with a JBL 600.1 at 2ohms, so the sub is seeing 600-700rms, so if you give the Type R 600-1000rms, it will do fine. you will need to set your gains correctly ofcourse, so you do not get any clipping, make sure you use MDF for the wood, deck screws, glue(i use Gorilla Glue, and i have used Elmers Wood Glue with great results, you can use liquid nails and silicone also, but make sure you wipe up the excess, as they Will run, so let the glue dry some before you put the sub in so none of it falls on the sub), and be sure to predrill your holes, and dont put the screws to close to the corners, i put my screws on the corners about 2" away, and every 4"-5" or so.. if you have any questions hit me up on AIM or MSN

msn: [email protected]
aim: Scarr3ll

by Way 2 Fonky » Mon Jan 22, 2007 8:12 pm

Scarrell I like your layout a lot. I've read a couple of your other type r posts. It looks like you're getting the most out of that sub. I'm planning to use your same box design. Any tips on making it?
I also read you tuned your sub to your box, how could I do that?

by Scarrell » Sun Jan 21, 2007 9:57 pm

http://mobile.jlaudio.com/support_pages.php?page_id=161

i also have a Type R 12", mine is dual4ohm, so mine is wired at 2ohms, my JBL 600.1 does 300rms at 4ohms, 600rms at 2ohms and 1ohm, so i can either wire my Type R at 8ohms or 4ohms, at 8ohms, the sub would only be getting like a 100rms, so obviously the 2ohm configuration is my best option to give the subs optimum performance.. the Type R will handle 800rms and be fine. if yours is dual4ohm.. check out my Photobucket page and go to Saturn for pics of my ride/stereo.

having trouble understanding dvc

by Way 2 Fonky » Sun Jan 21, 2007 9:25 pm

I have decided to buy an alpine type r 12" sub. The problem is i'm having trouble understanding the dual voice coil part.
I have an amp that is 400w rms bridged @ 4 ohms, or 800w rms bridged @ 2 ohms.
So, I have no idea how to hook up the amp. I dont understand how the ohms change with a bridged amp and a dvc sub.

Top