by GlassWolf » Fri Jul 22, 2005 8:59 am
you are correct.
the JL Audio slash series amplifiers use their RIPS technology which equates to a regulated power supply and regulated output stage, so regardless of input voltage, or load within operating specs, the amplifier will always put out exactly the same amount of power.
In your case, 150 watts RMS per channel.
If you want an amp that puts out more power at lower loads, go with JL's e-series amplifeirs, not the slash series.
the e series are cheaper, and have unregulated power supplies and output stages, like most entry level amplifiers.
you are correct.
the JL Audio slash series amplifiers use their RIPS technology which equates to a regulated power supply and regulated output stage, so regardless of input voltage, or load within operating specs, the amplifier will always put out exactly the same amount of power.
In your case, 150 watts RMS per channel.
If you want an amp that puts out more power at lower loads, go with JL's e-series amplifeirs, not the slash series.
the e series are cheaper, and have unregulated power supplies and output stages, like most entry level amplifiers.