Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

Sub Mounting

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:awesome: :argh :ditto :inout :words :bow :cheers: :bigwink: :fing02: :sad017: :scorp: :o :D ;) :p :unwell028 :tongue017 :thumbsup :surprised :sm29: :angry011: :angry015: :angry012: :nono: :angry010: :nono :banghead :mad: :dif :angry :CRZ_13: :eek: :confused: :confused0 :confused :( :sad: :cool: :dance :mecry: :jesterlol :embarrass :flame: :doh :evil019: :evil001: :rolleyes: :sub:
View more smilies
BBCode is ON
[img] is ON
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: Sub Mounting

by Jonathan » Tue Jan 03, 2006 5:25 am

Which is why you do stealth installs, like Jeff Smith's:
http://www.sounddomain.com/ride/351178/1
http://www.sounddomain.com/ride/351178/2

by Ryan from Ohio » Tue Jan 03, 2006 4:12 am

99% of thefts are smash and grabs.

Ive NEVER heard of a theif unscrewing subs and nicely taking out head units...

:)

by Jszar » Tue Jan 03, 2006 1:54 am

Or just alternate different screws. It takes more time to put in and take out for you, but in most cases too much time for a thief to mess with.

If you are doing a one time install, or when you adjust everything to its final dimensions and you are sure you wont need to take it out...do a flush mount. Carve into the MDF enough so that the subs' frame is flush with the board, screw it down and putty or carpet over the edge around the sub. Or you can just putty the screw heads...a knife will clean it out, but again...it will take more time than a thief is usually wanting to spend.

by OnYrMrk » Mon Jan 02, 2006 6:09 pm

I use the spanner screws that Bill showed with his link. Every piece of equipment in my car is screwed down with three different types of spanner screws.

by Jonathan » Mon Jan 02, 2006 12:49 pm

The ones around here aren't too smart, or professional :) There are always other security screws as well, tri wings, snake eyes, socket pin head, opsit, lots of options.

by Bwcad1 » Mon Jan 02, 2006 12:47 pm

yea but most dont have the tools to remove these types of screws ifyou use those its a little bit safer.


http://www.tamperproof.com/index.cfm?fu ... n=products

by Justin from Detroit1 » Mon Jan 02, 2006 12:40 pm

Jonathan wrote:I agree with William. Another thing to note is that you can use an allen head, torx, robertson, and other screw heads so that a thief can't take a sub out with a common screwdriver. OnYrMrk has displayed this with his system.
A common thief will carry allen wrenches and torx bits with them. If they are smart enough to get into your trunk, they are smart enough to bring the right tools.

by Jonathan » Mon Jan 02, 2006 11:57 am

I agree with William. Another thing to note is that you can use an allen head, torx, robertson, and other screw heads so that a thief can't take a sub out with a common screwdriver. OnYrMrk has displayed this with his system.

by William from NOLA » Mon Jan 02, 2006 8:41 am

On my last box, I used machine screws and T-nuts. I advise that if you plan on removing the sub multiple times so that you don't tear up the MDF too bad.

by OnYrMrk » Mon Jan 02, 2006 8:37 am

^^^ x2

Top