Don't let me mess this up!

[audiocr381ve]

Hey dudes, I need your creativity in creating this system I have pieced together. All parts are in, I just don't know where to start. After reading many reviews on this money saving set of components, I went with the 6.5" Phoenix Gold RSD component set. I'll give you a full review after everything is set up.
I'm installing the component set and want to get opinions on tweeterplacement and proper speaker installation.
Goal - Cut corners and spend the least amount of money possible. Sound Quality.
My big thing is help on installing the tweeters and achieving optimal imaging. I have no fabrication experience. I've never mounted a tweeter. I need to know how to cut in the door or a-pillar (if that's where you advise they go), what tools to use, and most of all your patience :help:
This is the 3rd system you guys will have helped me install. I was the 1,000+ post kid back in the ezboard days before we made the switch here, 18 years old and talking smack when I met the OG's around here. Embark on this wonderful journey with me once again
::Equipment::
Head unit (that I adore) Eclipse CD1200G

New Amp: Eclipse EA4100 4 channel

Second Amp (awaiting advice on what to do with it. Use for sub? etc.) Eclipse 3640 4 Channel

[audiocr381ve]

The Sub: 8" JL Audio W0 (I think) Don't know it's specs.

Where should I mount my tweeter for optimal sound quality? You're advice greatly needed.

[Bwcad1]

Try all the places with some double sides tape. When you figure out which you like best make it permanent.

[MobileAudio219]

Try all the places with some double sides tape. When you figure out which you like best make it permanent.

x2

And build a new box for that sub. :happy055:

[falkenbd]

Is it a 4 ohm sub?

If it is, you could bridge the silver colored amp on your midbasses, and on the black amp bridge 2 channels to the sub, and use the other 2 to run the tweeters.

You'd need a crossover either in your deck, or external to do this unless your passives are capable of bi-amping (which i doubt they are).


Otherwise you only need 1 of those amps to run the components and the sub.