Posted: Sun Aug 28, 2011 6:43 pm
Unless you adjust time alignment with something they will hit at the same time. However since one sub is in a box of a different size you may end up with some differences or issues.
Don't wire the 3rd speaker at 2 ohm. It will see twice the power of the other two, and could through your low end FR out of whack causing cancelation. Wire it at 8 ohm so it sees the same power as the other two.Greatwhtbuffalo wrote:The two chambers were built at 1.25 cu ft I made the 3 chamber 1.38 cu ft air space I will wire it 2 ohm. It should rock
And I would have made the internals for all three boxes the same, but .13 shouldn't make that big of a diffrence.