Page 2 of 2
Posted: Tue Jun 12, 2007 12:36 pm
by whataburger
thats 14" x 14" ???? I am guessing?
Posted: Tue Jun 12, 2007 3:45 pm
by whataburger
This is what I have come up with that will fit my needs, could I get one of you guru's to take a look at it and give me an idea of what changes I need to make and what size that port should be?
sorry for whoring the thread, but it is about an alpine type r 12" ! LOL
Posted: Tue Jun 12, 2007 3:52 pm
by CaptainPioneer
haha i would ask Bwcad1 on figureing out the sqft on that cause im clueless plus i suck balls when it comes to math
Posted: Tue Jun 12, 2007 4:46 pm
by jonnyb
looking at that, hurts my brain.
what is it?
Posted: Tue Jun 12, 2007 4:57 pm
by swimmerdude
By looking at your drawing(it was kind of confusing at first.... hidden lines > you) That box has a gross volume of like 3.7cubes. I would do a 3.5" tall port that is the width of the box of course. Make it 30.5" long. That should get you aprox. a 2.75cube enclosure.
Posted: Wed Jun 13, 2007 5:24 am
by whataburger
is there a better configuration/design I could use? using those exterior dimensions as maximums?
since you say the box is oversized so make the port longer, is that the basic theory? the box can be any size, but it iwll be regulated by the port?
Posted: Wed Jun 13, 2007 9:54 am
by custom creations
well back to why this thread was created.. would someone be able to desing a box or make templates for me to use so i could make the best box for my two type r's? and i have a 1200 watt sony explode amp kickin around and was wondering if that would run the two type r's well?