Page 1 of 2

blew my 2500d

Posted: Tue Feb 08, 2011 9:52 pm
by loudwagon15s
well, after owning this amp for about 4 years, it finally took a poop today (i think) got in my car started playing at about 1/3 volume, the sub cuts out, and now all i get is a constant click from the sub (about 2 clicks per second) unplugged the rca's, same thing, getting proper voltage at amp. No burning smell or anything coming from the amp.
Anyone ever heard of this happening? or know which component(s) of the amp may be at fault?

Posted: Wed Feb 09, 2011 5:53 am
by Bwcad1
Input section will typically do that. Make sure it wasn't the sub/source that went or something crazy.

Posted: Wed Feb 09, 2011 6:15 am
by loudwagon15s
the sub seems fine, though i'll check the coils when i take the amp out. i dont think its the source because it still happens when i unplug the rca's.

Posted: Wed Feb 09, 2011 6:43 am
by Bwcad1
Does the amp protect light come on?

Posted: Wed Feb 09, 2011 7:17 am
by loudwagon15s
i'm not sure, because i can't remember if it has a different colored light for protect, but the amp light comes on. (red, like it has since i've owned it) I know the protection circuit works because it has in the past for low voltage when i had a bad ground about 2 yrs ago. For every thump there is enough current draw to cause a tiny bit of dimming.

Posted: Wed Feb 09, 2011 10:11 am
by loudwagon15s
well i took off the back cover and found two of the smaller caps have black tips on them, not sure if its ink or if the're blown, ill get some pics later

Posted: Wed Feb 09, 2011 10:12 am
by Bwcad1
if they were blown it would smell like sulfur typically

Posted: Fri Feb 11, 2011 8:17 am
by loudwagon15s
Image
Image
Image

i can't remember if those lil guys are caps or what, but i've never seen them with black tips like that, i can't smell anything burned or that smells like sulfur but they are really small so i'm guessing if they were the problem i wouldnt be able to smell it

Posted: Fri Feb 11, 2011 8:22 am
by Bwcad1
power it up to a diffrent sub or speaker see if it makes noise

Posted: Fri Feb 11, 2011 8:46 am
by loudwagon15s
i could do that, but i've got the fsq runnin on my 4 channel, a coil to a channel, i'd prolly notice if somethin was wrong with the sub, should i still hook it up to something?