Car Audio Central - Ultimate Car Audio Forum and Community

I just got 2 sunvisor tft tv's, and i was wondering what type of conector do i need for both of them to work with my dvd player. Thanks.

it should be just rca

yup...you should have a connector that connects at or near the monitor and you will be able to run that down through the headliner and you will need some type of splitter or at least y-cord to get the signal to all monitors. some of them will let you run one monitor as a slave to the other so this would not be neccasary on those units if you have that..

where would i be able to get this splitter or y-cord so i would be able to get signal to both monitors. Thanks

did you buy these new? do you have all the installation hardware, cables etc? an instruction manual? you may not need the y-cords as you may be able to slave one monitor off the other......

If you do need a y-splitter though, you can probably pick one up at radio shack.

Yea, i got these brand new. All the hardware it came with was the mounting, and the harness which had the black wire, red wire, and a green wire, yes it has a manual, but doesn't show much bout how to work the tv's, which isn't hard.

does these take 1/4 mini plug? i know mine do or maby1/8 plug

qlc1964 wrote:does these take 1/4 mini plug? i know mine do or maby1/8 plug

I think you're thinking about the 3.5mm plug... although I don't know what kinda response you're gonna get on this from the original writer of the thread since this thread is over 2 and a half years old... Please check the dates on the threads before bringing them back up unless it is something of real value thanks.

yeah half sleep that night didn`t notice the date. my bad!!!!
But i wonder did he solve the problem?