Page 1 of 3
need mechanical input
Posted: Sun Jan 07, 2007 4:24 pm
by smoker
i have a 93 altima, it wouldnt start yesterday when leaving work, it acts like im not pushing the clutch in when i am so today i tried to bypass the clutch safety switch and still no go.....any ideas?
Posted: Mon Jan 08, 2007 2:47 am
by phthisis
Did you try a spare key? My car has only acted like that when my key was messed up.
Posted: Mon Jan 08, 2007 4:24 am
by smoker
i dont have an immobilizer system on mine.....
Posted: Mon Jan 08, 2007 5:44 am
by Bwcad1
does the starter click? i don't really have any ingenious ideas just going over the usuals. i know this sounds odd but hit the starter with a hammer and then try it.
Posted: Mon Jan 08, 2007 5:52 am
by smoker
no click, nothing....it doesnt sound odd to me....ive dont it before and its worked.......
Posted: Mon Jan 08, 2007 5:57 am
by CaptainPioneer
I think this has happened before in a friend of mines car. She had an Altima or a sentra i think. I dont know how she fixed it but, she said she just disconected her battery completely for a couple minutes and then put it back on. and it worked.
I dont think that will work, but u could give it a try.
Posted: Mon Jan 08, 2007 6:03 am
by CaptainPioneer
Also Smoker i pulled this off a forum just incase this is the problem:
tipsam
External
Since: Aug 28, 2004
Posts: 3
[Post] (Msg. 2) Posted: Sat Aug 28, 2004 8:20 pm
Post subject: Re: 1993 won't start [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I have a 1994 altima, mine is an manual tranny. On the clutch there is a
rubber grommet, if this grommet is missing the hole it is in on the clutch
will allow the clutch selonoid to go thru the hole and the car will not
start.This grommet allows the selonoid to activate and complete the start
sequence once the key is turned. The factory grommet is black, I purchased
a couple of replacement grommets for about $1.50 a piece just in case this
problem occurs, it is very easy to install, no need for a mechanic to
charge you an analysis fee and then a part and labor fee.
Posted: Mon Jan 08, 2007 10:01 am
by cargodz
Could also be the clutch slave cylinder.... and have you checked your clutch fluid?
Posted: Mon Jan 08, 2007 10:35 am
by MobileAudio219
cargodz wrote:Could also be the clutch slave cylinder.... and have you checked your clutch fluid?
No, no it couldnt be. The slave cylinder and/or low clutch fluid would have nothing to do with the car not starting...
Jack it up (use jack stands) and make sure the starter wires arent loose. Since you by-passed the the clutch switch put the car in neutral, turn the key to the ON position, then jump the solenoid and see if it turns over, if not, its your starter... If it does, its probably the ignition... yay, now give me a dollar. :happy055:
Edit. Yeah, smacking it with a hammer will sometimes get it going...
Posted: Mon Jan 08, 2007 10:37 am
by CaptainPioneer
haahh, i also heard about some of the early altima's starters goin on it... I think justin could be right here