by cargodz » Tue Jul 11, 2006 5:57 am
TechSys wrote:Cargodz. I'm not too sure about the blade series. there are 2 differant series of Blade, the blade extreme, and just plain ole blade.
Model numbers for the Blade Extreme start with BLX. Model numbers for the Blade series start with BL.
The Blade Extreme seems to be the better. The BLX5000 does not have any onboard fuses.
Try 30volts off a Boss PD-2000 at 1ohm per channel (each channel is 30 volts AC with a 50hz test tone). I don't think that's bad at all, for Boss.
No arguement here, the old Powerdrive systems were the only ones worth while and according to the Boss Rep I talked to, were the baseplate design behind the new Blade BLX series and also the BL3KD which seems a very good amp for a lower end brand.
P.S. that old ava unit was a nightmare
[quote="TechSys"]Cargodz. I'm not too sure about the blade series. there are 2 differant series of Blade, the blade extreme, and just plain ole blade.
Model numbers for the Blade Extreme start with BLX. Model numbers for the Blade series start with BL.
The Blade Extreme seems to be the better. The BLX5000 does not have any onboard fuses.
Try 30volts off a Boss PD-2000 at 1ohm per channel (each channel is 30 volts AC with a 50hz test tone). I don't think that's bad at all, for Boss.[/quote]
No arguement here, the old Powerdrive systems were the only ones worth while and according to the Boss Rep I talked to, were the baseplate design behind the new Blade BLX series and also the BL3KD which seems a very good amp for a lower end brand.
P.S. that old ava unit was a nightmare