Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Have a cool ride? Then show it off on our website! All vehicles welcome!
Stupid...... Effin..... Idiot!
- MobileAudio219
- Master of My Domain
- Posts: 4919
- Joined: Thu Oct 07, 2004 4:00 am
- Location: Sullivan Missouri
Stupid...... Effin..... Idiot!
OK, so I usually try to avoid the car audio sections of other car based forums because there's always a know it all, who knows very little...
Well the other day I got bored and went into the audio section on v8s10(.)org... bad mistake!
Rather than tell you about it, I will let you read...
http://www.v8s10.org/forum/viewtopic.ph ... 34#p220334
am I wrong here???
I have a feeling I'll be banned from there.
Well the other day I got bored and went into the audio section on v8s10(.)org... bad mistake!
Rather than tell you about it, I will let you read...
http://www.v8s10.org/forum/viewtopic.ph ... 34#p220334
am I wrong here???
I have a feeling I'll be banned from there.
- MobileAudio219
- Master of My Domain
- Posts: 4919
- Joined: Thu Oct 07, 2004 4:00 am
- Location: Sullivan Missouri
I've learned a lot from this forum. Heck, I've even learned a little from you!Bwcad1 wrote:This is y people often think im an asshole when it comes to audio, simple fact is everyone in the world who does car audio thinks they know everything or has a buddy who does. i gave up trying to help them a long time ago.
It's not bad when somebody is trying to learn, it's when they turn off the "learn" valve, and turn on the "I'm so much f*ckin better than you, there's nothing I don't know, I'm the god of everything" valve.
I don't know everything about car audio. I don't know everything about cars/trucks. I don't know everything about wood work, or fiberglass. But I am a member of about 10 billion forums (s10, rangers, mustangs, car audio, fiberglass, body work/paint, construction, etc), and when I have a question I go to the best forum to find the answer.
I helped my uncle build his shop. We did all the excavating, all the concrete, pluming, framing, sheeting, roofing, siding, windows, roughed in the electric (local law requires a licensed electrician to do the finish work). Since then I've done many engine and tranny swaps in that same garage.
I like doing a wide variety of stuff, which means I usually have a lot of questions.
-
ZeroAccess
- Senior Member
- Posts: 780
- Joined: Sat Nov 04, 2006 1:58 pm
I like how he posted the link...
Which one of those cars is he responsible for?
You should post a link to like http://www.playboy.com and be like while were just bullshitting one another all them girls there..yea there my hoe's
Which one of those cars is he responsible for?
You should post a link to like http://www.playboy.com and be like while were just bullshitting one another all them girls there..yea there my hoe's
- MobileAudio219
- Master of My Domain
- Posts: 4919
- Joined: Thu Oct 07, 2004 4:00 am
- Location: Sullivan Missouri
Hey Mobile ask him if he knows the difference between absolute and relative phase.
If he says yes, ask him how much tuning is it going to take to correct for 8 different path lengths.
Or if he prefers mono or stereo pink noise when adjusting phase or TA?
FYI in a 2 seat show car its best to deal with this problem by equaling out the path lengths between seats. You can play with phasing, but you could cause more problems in the second seat than you correct in the first.
In a one seat car you can do it by swapping phasing one one side.
If he says yes, ask him how much tuning is it going to take to correct for 8 different path lengths.
Or if he prefers mono or stereo pink noise when adjusting phase or TA?
FYI in a 2 seat show car its best to deal with this problem by equaling out the path lengths between seats. You can play with phasing, but you could cause more problems in the second seat than you correct in the first.
In a one seat car you can do it by swapping phasing one one side.
-
CaptainPioneer
- Master of My Domain
- Posts: 3389
- Joined: Fri May 20, 2005 8:30 am
- Location: Monroe, CT
- Contact:
MobileAudio219 wrote:LMAO.
You know what really grinds my gears? Jerk offs like him!![]()

You know what really grinds my gears, YOU AMERICA! lol...
Sucks dude just take it in stride and remember ultimately its not worth getting upset about. Pretty much anything online is a farse and people are fake as all hell. For instance Bill is actually a 300lb fat chick posing as a car audio fanatic. Why you think there is a van build? Cause fat chicks need a big space for lovin!
You know i'm jokin Bud! lol
COR UNUM VIA UNA - Jay Chmura
- MobileAudio219
- Master of My Domain
- Posts: 4919
- Joined: Thu Oct 07, 2004 4:00 am
- Location: Sullivan Missouri
Haha, he just touched a nerve... He came across as a know it all a-hole. If he would of said "I disagree" or something similar I would of been like ok, whatever...
But he's the type of person you just want to kick in the face...
Note: I am in no way threatening the guy. I have no intention of kicking him in the face or inflicting any harm on him. Of course I can't guarantee that he won't get kicked in the face, it just won't be by me. I hear goats tend to kick while being penetrated, and he definitely seems like a goat f*cker to me.
But he's the type of person you just want to kick in the face...
Note: I am in no way threatening the guy. I have no intention of kicking him in the face or inflicting any harm on him. Of course I can't guarantee that he won't get kicked in the face, it just won't be by me. I hear goats tend to kick while being penetrated, and he definitely seems like a goat f*cker to me.
I like how he posts a link to some cars to imply he did them then calls you an A-hole for calling him out. People like that always get mad when you question their "expertise".
You find dicks like that every were, they really like to talk their shit online were they are protected by the anonymity of the net.
You find dicks like that every were, they really like to talk their shit online were they are protected by the anonymity of the net.

