Attention all members!
Have a cool ride? Then show it off on our website! All vehicles welcome!

Please Help!!

All questions related to amplifier installation and troubleshooting.
mjfdrums
Junior Member
Posts: 1
Joined: Sat Feb 21, 2015 3:17 pm

Please Help!!

Post by mjfdrums »

I recently got two Rockford Fosgate P@ 10's in a box installed in my 2014 Nissan Pathfinder. I had the installer guy put my amp on the box it self. I needed to take my box out for the space temporarily. I unscrewed the wires from the amp, and the wires touched and i got two sparks!! Does this mean i just fried my new system? Please Help!!
User avatar
Chris from Washington
Posts: 4671
Joined: Sat Oct 02, 2004 8:00 am
Location: Washington
Contact:

Re: Please Help!!

Post by Chris from Washington »

mjfdrums wrote:I recently got two Rockford Fosgate P@ 10's in a box installed in my 2014 Nissan Pathfinder. I had the installer guy put my amp on the box it self. I needed to take my box out for the space temporarily. I unscrewed the wires from the amp, and the wires touched and i got two sparks!! Does this mean i just fried my new system? Please Help!!
Hi,
Welcome to the forum.

Hopefully all you did was pop the fuse near the battery. When you got the spark, did the wires touch the amp, or just each other?
I would put the gear back in, check the fuse near the battery. Replace if bad, and give it a try.

I think you're going to be ok.

Let us know what you find.

Chris
Robert Wollenberg
Posts: 1386
Joined: Mon Sep 19, 2005 4:45 am
Location: Abilene, Texas

Re: Please Help!!

Post by Robert Wollenberg »

Agreed. You should be fine. As Chris said, you probably blew the fuse by the battery. The amplifier should be ok.
Robert R. Wollenberg
Audio Alchemy, Owner
Phone: (325) 480-2790
E-mail: [email protected]
Web: www.audiochemy.com
www.abilenecaraudio.com
www.abilenecaralarms.com
FB: www.facebook.com/audio.alchemy
Post Reply