video question?

01mercLS · Post by **01mercLS** » Wed Nov 09, 2005 2:04 pm

I just got 2 sunvisor tft tv's, and i was wondering what type of conector do i need for both of them to work with my dvd player. Thanks.

sinister audio · Post by **sinister audio** » Wed Nov 09, 2005 2:58 pm

it should be just rca

smoker · Post by **smoker** » Wed Nov 09, 2005 3:07 pm

yup...you should have a connector that connects at or near the monitor and you will be able to run that down through the headliner and you will need some type of splitter or at least y-cord to get the signal to all monitors. some of them will let you run one monitor as a slave to the other so this would not be neccasary on those units if you have that..

01mercLS · Post by **01mercLS** » Wed Nov 09, 2005 5:50 pm

where would i be able to get this splitter or y-cord so i would be able to get signal to both monitors. Thanks

smoker · Post by **smoker** » Wed Nov 09, 2005 5:54 pm

did you buy these new? do you have all the installation hardware, cables etc? an instruction manual? you may not need the y-cords as you may be able to slave one monitor off the other......

ridr4lif · Post by **ridr4lif** » Wed Nov 09, 2005 6:23 pm

If you do need a y-splitter though, you can probably pick one up at radio shack.

01mercLS · Post by **01mercLS** » Thu Nov 10, 2005 4:25 am

Yea, i got these brand new. All the hardware it came with was the mounting, and the harness which had the black wire, red wire, and a green wire, yes it has a manual, but doesn't show much bout how to work the tv's, which isn't hard.

qlc1964 · Post by **qlc1964** » Sat Feb 23, 2008 9:47 pm

does these take 1/4 mini plug? i know mine do or maby1/8 plug

cargodz · Post by **cargodz** » Sun Feb 24, 2008 3:45 am

qlc1964 wrote:does these take 1/4 mini plug? i know mine do or maby1/8 plug

I think you're thinking about the 3.5mm plug... although I don't know what kinda response you're gonna get on this from the original writer of the thread since this thread is over 2 and a half years old... Please check the dates on the threads before bringing them back up unless it is something of real value

thanks.

qlc1964 · Post by **qlc1964** » Sun Feb 24, 2008 8:25 pm

yeah half sleep that night didn`t notice the date. my bad!!!!
But i wonder did he solve the problem?