speaker help

ksimms · Post by **ksimms** » Fri Jan 27, 2006 7:04 pm

Iplan on adding a sub once I get my rear speakers problem solved

JeremyC · Post by **JeremyC** » Fri Jan 27, 2006 9:22 pm

Uhhhhhh, fix the problem and then move on. If you leave it, and just do something else, you will only cause more problems for yourself.

I would get a soldering gun, and some shrink tube, or some simple crimp conecors an redo your wires. Then add a sub and amp. If you don't it will end up costing you alot more money in the long run.

Blitzzzkrieg · Post by **Blitzzzkrieg** » Sat Jan 28, 2006 10:01 am

or just use wirenuts man...pull it out, wirenut ur wires and ur good to go

audiobass10 · Post by **audiobass10** » Sat Jan 28, 2006 10:08 am

Take the unit out..Check the rear speaker connectoin..even if it looks good redo it..should work.

William from NOLA · Post by **William from NOLA** » Sat Jan 28, 2006 10:10 am

JeremyC wrote:Uhhhhhh, fix the problem and then move on. If you leave it, and just do something else, you will only cause more problems for yourself.
I would get a soldering gun, and some shrink tube, or some simple crimp conecors an redo your wires. Then add a sub and amp. If you don't it will end up costing you alot more money in the long run.

And if you don't have shrink tube, electrical tape does you good.

JeremyC · Post by **JeremyC** » Sat Jan 28, 2006 1:12 pm

William from NOLA wrote:And if you don't have shrink tube, electrical tape does you good.

If you solder the wires first. As you have experianced just twisting the wires and taping them doesn't hold to well. (just wanting to clarify william, I knew what you meant)

The reason I like shrink tube, is it will never get hot and come apart. Electrical tape can, especially in hot wet
climate.

Blitzzzkrieg wrote:or just use wirenuts man...pull it out, wirenut ur wires and ur good to go

I don't like wire nuts. Yeah crimp conectors are ok, but wire nuts don't do well under vibrations, and most people use the wrong size which leads to even more problems.

Blitzzzkrieg · Post by **Blitzzzkrieg** » Sat Jan 28, 2006 3:50 pm

i uuse the small grey ones, always have...ive never had a problem with them coming lose...just screw em on till the wires start to twist and u'll be good...i HATE those crimp connectors....ehenever u wanna take the unit out, u gotta cut and restrip ALL the wires

Chris from MI · Post by **Chris from MI** » Sun Jan 29, 2006 2:04 pm

If you dont get anything by checking the connections you may want to check the run of wire to make sure there isn't any splits or the wire is damaged or worn through somewhere.