rage gold vs. bondo.

sinister audio · Post by **sinister audio** » Sun Jan 14, 2007 9:02 pm

for supplys go to an auto body store. most parts stores have just cheap paint. good paint comes from Dupont PPG house of kolor along with a few others. and for doing door pods it all depends on the panel. if you havent got one already id suggest gettting a video set on how to do fiberglass work that will help out alot.

subster87 · Post by **subster87** » Sun Jan 14, 2007 10:03 pm

ok good idea on that one. I have fiberglassed and its turned out i just want to be good enough to make paintable projects. The speaker sits 3 inches behind the door panel, i want to bring it up on the front of it, could i make a series of mdf ring to span the gap to the new door pod? I think that would reduce most if not all of the instability, also making a fairly large carvity for the speaker to work in if allowed to play in the hollow of the door.

MobileAudio219 · Post by **MobileAudio219** » Mon Jan 15, 2007 5:59 am

Rage is all the rave. Bondo just plain sucks.

Have you ever heard of the milkshake? it can really help with those pin holes and such. :happy055:

justaghost · Post by **justaghost** » Mon Jan 15, 2007 8:30 am

yay milkshake/pepto good stuff. I use it a lot on the inside of my sealed enclosures and give the whole interior a good coat for a great seal.

subster87 · Post by **subster87** » Tue Jan 16, 2007 9:49 pm

ok im out of the loop for sure on this one.

justaghost · Post by **justaghost** » Wed Jan 17, 2007 4:09 pm

milkshake is a blend of resin and bondo. i call it pepto because when you add the red colored bondo hardener, it looks like pepto bismol

subster87 · Post by **subster87** » Sun Jan 21, 2007 10:31 pm

oooo makes sense, i couldnt decide if it was a joke or what.